This is a tutorial on setting up the TP-Link TL-W725N Wifi Adapter driver on beaglebone black.

The link to github repo: https://github.com/lwfinger/rtl8188eu

Also the wifi should be powered by the 5V-2Amp adapter to work otherwise it will not work with usb power. source

BeagleBone Black gains $50 4.3-inch cap touchscreen Cape

BeagleBone Black gains $50 4.3-inch cap touchscreen Cape

BeagleBone-Black-Wireless-specs

BeagleBone Black Wireless speeds development

When it comes to development boards, it’s not only about the Arduino and Raspberry Pi. The TI-friendly BeagleBone is there in the mix, too, battling for your notice

Which is a good reason to emphasize some developments around the BeagleBone Black single-board computer: there is the new version and two new Capes from the BeagleBone team.

Aside from the BeagleBone Black Wireless (down the page), you will also discover two new ‘cape’ add-on boards for the existing BeagleBone Black.

BeagleBone Black Wireless

For a start the BeagleBone Black Wireless, which is virtually a BeagleBone Black with on-board 802.11 b/g/n 2.4GHz Wi-Fi and Bluetooth. It’s going after in the path of the Raspberry Pi 3 by building in Wi-Fi support to simplify wireless communications.

Its powerplant is the Texas Instruments Sitara AM3358 1GHz ARM Cortex-A8

“Similar to the BeagleBone Black, the wireless preserves HDMI output, serial debug port, PC USB interface, USB 2.0 host, reset and power switches, and increases two more status Leds for WiFi as well as Bluetooth,” points out BeagleBone.org.

“Likewise retained is the 4GB of on-ship eMMC memory with Debian Linux preinstalled, permitting the BeagleBone Wireless to boot in approx . 10 seconds and have you developing by your internet browser in lower than Five minutes by using basically a single USB cable.”

You will find the details of the board by expanding the graphic earlier mentioned, and a data sheet is right here for download.
https://element14.com/community/servlet/JiveServlet/downloadBody/84121-102-2-360701/BeagleBone%20Black%20Wireless%20Datasheet.pdf

Be aware that it marks the introduction of the Octavo OSD3358 SiP, integrating BeagleBone functionality into one BGA package.

Find out more about its features and advantages thru this url http://mouser.com/new/octavo-systems/octavo-systems-osd335-sip/

Since we are dealing with mastercard-sizes peices of kit, space must be made for additional features. This means this particular BeagleBone has misplaced its 10/100 Ethernet port, generating space for a TI WL1835 WiLink wifi interface.

The entire spec:

Chip
:: AM335x 1Gigahertz ARM Cortex-A8
:: SGX530 graphics accelerator
:: NEON floating-point accelerator
:: 2x PRU 32-bit 200Megahertz micro-controllers

Connectivity Options
:: WiLink 1835 802.11b/g/n 2.4GHz WiFi, Bluetooth, as well as Bluetooth Smart Module
:: USB client: power, debug and device
:: USB host
:: Micro High-definition multimedia interface output
:: 2x 46 pin headers

Memory
:: 512Megabyte DDR3 800Megahertz RAM memory
:: 4GB Inserted eMMC Flash with Debian Distro pre-installed
:: micro sdcard Slot

Software Capability
:: Debian
:: Android
:: Ubuntu
:: Cloud9 IDE on Node.js w/ BoneScript library

Keeping in mind the the two new capes…

Wireless Cape add-on

Recognize that the new Wireless Cape takes BeagleBone Black ahead of the abilities of BeagleBone Black Wireless, indicates Steve Bush in his news piece on the release. It’s using Texas Instruments WiLink 8 (WL1837) industrial dual-band (2.4GHz and 5Gigahertz), 2×2 MIMO Wi-Fi, Bluetooth and Bluetooth Smart (often known as Bluetooth LE), that also features Zigbee and NFC.

The cape comes along with Debian Distro pre-installed and 4Gbyte of on-ship eMMC Flash memory. “Designers can be developing making use of their browser in below Five minutes using only 1 USB cable,” said Farnell.

Display cape add-on

Consider there is yet another Display cape add-on conveniently obtainable. It carries connections for a 4.3″ colour touch-screen an LED backlight and capacitive overlay “for a phone-like interface”.

The cape targets interactive projects, embedded systems and stand-alone installations.

Costs

Pricing is around £55 for the BeagleBone Black Wireless, £35 for the display cape add-on also £44 for the wireless cape add-on .

Buy on Amazon . com site

BeagleBone Black Wireless Starter Kit- Includes : BeagleBone Black Wireless With WiFi and Bluetooth–Clear Case–Power Supply–Micro USB Cable
https://amazon.com/BeagleBone-Black-Wireless-Starter-Kit/dp/B01NGTOX40

We've served hundreds of customers globally and your next partner could be us. we are all set to bring your business or project to next level!

Leave a Reply

Your email address will not be published. Required fields are marked *