I love the internet service Pandora Radio, so I decided to make a need little radio. Instructions on how to make your own (coming soon) at the links below. Inside is a Beagleboard running Ubuntu 12.4, using the CLI Pandora client Pianobar. A PIC24 microcontroller takes care of the buttons and LCD. It took about 8 months from conception to the completion of the project, but it was a ton of fun, and frustration, along the way. I was inspired by the Wifi Radio at MightyOhm to make something a bit more challenging. Enjoy.
Check out the links below.
http://www.engscope.com/pandorabar/ – project homepage and instructions
http://6xq.net/projects/pianobar/ – Pianobar homepage, a CLI Pandora client for linux
http://beagleboard.org/ – Beagleboard homepage
http://mightyohm.com/blog/2008/10/building-a-wifi-radio-part-1-introduction/ – Original Wifi Radio Quelle
BeagleBone Schwarz gewinnt $50 4.3-Zoll Kappe Touchscreen Cape
BeagleBone Black Wireless speeds development
With regards to development boards, it’s not only about the Arduino and Raspberry Pi. Die TI-freundliche BeagleBone ist es in der Mischung, auch, competing for your focus
Which is a valid reason to spotlight some developments around the BeagleBone Black single-board PC: there’s the new version and 2 neue Umhänge aus dem BeagleBone Team.
As well as the BeagleBone Black Wireless (down below), moreover, there are 2 frisch ‚Kap‘ Add-on-Boards für das aktuelle BeagleBone Schwarz.
BeagleBone Schwarz Drahtlose
To begin with the BeagleBone Black Wireless, which is essentially a BeagleBone Black with in-built 802.11 b/g/n 2.4GHz Wi-Fi as well as Bluetooth. It’s going after in the route of the Raspberry Pi 3 by building in Wi-Fi support to shorten wireless communications.
Sein Motor ist die Texas Instruments Sitara AM3358 1GHz ARM Cortex-A8
“Similar to the BeagleBone Black, the wireless maintains HDMI output, serielle Debug-Port, PC USB-Schnittstelle, USB 2.0 Wirt, reset and power control keys, and brings 2 more status Led lamps for WiFi and also Bluetooth,” explains BeagleBone.org.
“As well preserved is the 4GB of on board eMMC memory with Debian Linux preinstalled, enabling the BeagleBone Wireless to boot in approximately 10 seconds and have you developing on your internet browser in lower than Five min’s utilizing just a single USB cable.”
You will see the specifics of the board by expanding the photograph in this article, and a data sheet is below for download.
Keep in mind that it marks the introduction of the Octavo OSD3358 SiP, einschließlich BeagleBone Funktionalität in einem BGA-Gehäuse.
Go look at its capabilities and benefits with this url http://www.mouser.com/new/octavo-systems/octavo-systems-osd335-sip/
Provided that we’re dealing with visa card-measurements peices of kit, space is to be made for additional features. It implies this particular BeagleBone has misplaced its 10/100 Ethernet Anschluss, generating space for a TI WL1835 WiLink wifi interface.
The whole specifications:
:: AM335x 1Gigahertz ARM Cortex-A8
:: NEON Gleitkommazahlen Beschleunigers
:: 2x PRU 32bit 200MHz micro-controllers
:: WiLink 1835 802.11b / g / n 2,4 GHz-WLAN, Wireless bluetooth, and also Bluetooth Smart Module
:: USB-Client: Leistung, Debug und Gerät
:: Micro HDMI output
:: 2x 46 Stiftleisten
:: 512Megabyte DDR3 RAM 800Megahertz
:: 4GB Included eMMC Flash with Debian Linux Distribution pre-installed
:: micro sd card Slot
Software Match ups
:: Cloud9 IDE auf Node.js w / BoneScript Bibliothek
And lastly the the 2 neue Umhänge ...
Wireless Cape Add-on
Be aware that the new Wireless Cape takes BeagleBone Black above the functionality of BeagleBone Black Wireless, explains Steve Bush in his news piece about the release. It is based on Texas Instruments WiLink 8 (WL1837) Industrie-Dual-Band (2.4GHz as well as 5Gigahertz), 2× 2 MIMO Wi-Fi, BT und Bluetooth Smart (otherwise known as BT LE), which furthermore has Zigbee & NFC.
The cape occurs with Debian Linux Distribution pre-installed and 4GB of on-ship eMMC Flash memory. “Designers may be developing employing their internet browser in fewer than Five min’s utilizing a single USB cable,“Sagte Farnell.
Display Kap Add-on
Don’t forget there’s yet another Display cape add-on sold. Es umfasst Anschlüsse für eine 4.3in. color touch screen an LED backlight and capacitive overlay “for a mobile-like interface”.
The cape concentrates on interactive projects, embedded systems and stand-alone installs.
Cost is approximately ￡55 for the BeagleBone Black Wireless, ￡35 for the display cape add-on in addition ￡44 for the wireless cape add-on .
Bei Amazon kaufen . com
BeagleBone Schwarz Wireless-Starter Kit- Contains : BeagleBone Schwarzer drahtloser mit WiFi und Bluetooth–Klarer Fall–Netzteil–Micro-USB-Kabel