I love the internet service Pandora Radio, so I decided to make a need little radio. Instructions on how to make your own (coming soon) at the links below. Inside is a Beagleboard running Ubuntu 12.4, using the CLI Pandora client Pianobar. A PIC24 microcontroller takes care of the buttons and LCD. It took about 8 months from conception to the completion of the project, but it was a ton of fun, and frustration, along the way. I was inspired by the Wifi Radio at MightyOhm to make something a bit more challenging. Enjoy.

Check out the links below.
http://www.engscope.com/pandorabar/project homepage and instructions
http://6xq.net/projects/pianobar/Pianobar homepage, a CLI Pandora client for linux
http://beagleboard.org/Beagleboard homepage
http://mightyohm.com/blog/2008/10/building-a-wifi-radio-part-1-introduction/Original Wifi Radio Heimild

BeagleBone Black hagnaður $50 4.3-tomma hettu touchscreen Cape

BeagleBone Black hagnaður $50 4.3-tomma hettu touchscreen Cape


BeagleBone Black Wireless speeds development

With regards to development boards, það er ekki bara um Arduino og Raspberry Pi. TI-vingjarnlegur BeagleBone er í blöndu, líka, competing for your focus

Which is a valid reason to spotlight some developments around the BeagleBone Black single-board PC: Það er ný útgáfa og 2 Nýju Capes frá BeagleBone liðinu.

As well as the BeagleBone Black Wireless (fyrir neðan), moreover, there are 2 fersk Cape 'bæta við-á borðum fyrir núverandi BeagleBone Black.

BeagleBone Black Wireless

To begin with the BeagleBone Black Wireless, which is essentially a BeagleBone Black with in-built 802.11 b / g / n 2.4GHz Wi-Fi ásamt Bluetooth. It’s going after in the route of the Raspberry Pi 3 by building in Wi-Fi support to shorten wireless communications.

Its engine is the Texas Instruments Sitara AM3358 1GHz ARM Cortex-A8

“Similar to the BeagleBone Black, the wireless maintains HDMI output, raðnúmer kemba tengi, PC USB tengi, USB 2.0 vélin, reset and power control keys, and brings 2 more status Led lamps for WiFi and also Bluetooth,” explains BeagleBone.org.

“As well preserved is the 4GB of on board eMMC memory with Debian Linux preinstalled, enabling the BeagleBone Wireless to boot in approximately 10 seconds and have you developing on your internet browser in lower than Five min’s utilizing just a single USB cable.”

You will see the specifics of the board by expanding the photograph in this article, and a data sheet is below for download.

Keep in mind that it marks the introduction of the Octavo OSD3358 SiP, þar á meðal BeagleBone virkni í einum BGA pakka.

Go look at its capabilities and benefits with this url http://www.mouser.com/new/octavo-systems/octavo-systems-osd335-sip/

Provided that we’re dealing with visa card-measurements peices of kit, space is to be made for additional features. It implies this particular BeagleBone has misplaced its 10/100 Ethernet tengi, generating space for a TI WL1835 WiLink wifi interface.

The whole specifications:

:: AM335x 1Gigahertz ARM Cortex-A8
:: SGX530 grafík eldsneytisgjöf
:: NEON fljótandi-lið eldsneytisgjöf
:: 2x PRU 32bit 200MHz micro-controllers

Tengingar Options
:: WiLink 1835 802.11b / g / n 2.4GHz WiFi, Wireless Bluetooth, and also Bluetooth Smart Module
:: USB viðskiptavinur: máttur, kemba og tæki
:: USB gestgjafi
:: Micro HDMI framleiðsla
:: 2x 46 pin haus

:: 512Megabyte DDR3 800Megahertz RAM
:: 4GB Included eMMC Flash with Debian Linux Distribution pre-installed
:: Micro SD nafnspjald rifa

Software Match ups
:: Debian
:: Android
:: ubuntu
:: Cloud9 IDE um Node.js w / BoneScript bókasafni

And lastly the the 2 Nýju herðaslár ...

Wireless Cape bæta við-á

Be aware that the new Wireless Cape takes BeagleBone Black above the functionality of BeagleBone Black Wireless, explains Steve Bush in his news piece about the release. It is based on Texas Instruments WiLink 8 (WL1837) iðnaðar tvískiptur-band (2.4GHz as well as 5Gigahertz), 2× 2 MIMO Wi-Fi, BT og Bluetooth Smart (otherwise known as BT LE), which furthermore has Zigbee & NFC.

The cape occurs with Debian Linux Distribution pre-installed and 4GB of on-ship eMMC Flash memory. “Designers may be developing employing their internet browser in fewer than Five min’s utilizing a single USB cable,"Segir FARNELL.

Sýna Cape bæta við-á

Don’t forget there’s yet another Display cape add-on sold. It includes connections for a 4.3in. color touch screen an LED backlight and capacitive overlay “for a mobile-like interface”.

The cape concentrates on interactive projects, embedded systems and stand-alone installs.


Cost is approximately £55 for the BeagleBone Black Wireless, £35 for the display cape add-on in addition £44 for the wireless cape add-on .

Kaupa á Amazon . með

BeagleBone Black Wireless Starter Kit- Inniheldur : BeagleBone Black Wireless Með WiFi og Bluetooth–Hreinsa Case–Power Supply–Micro USB Cable

Við höfum birt hundruð viðskiptavina um allan heim og næsta maki þinn gæti verið okkur. við erum öll sett til að koma fyrirtæki þínu eða verkefni á næsta stig!

Skildu eftir skilaboð

Netfangið þitt verður ekki birt. Nauðsynlegir reitir eru merktir *