IEEE Embedded Projects on ARM9 / 11/CORTEX A8 hot
Real Time Ieee 2013-2014 Projects On Embedded Systems
Microcontrollers / Processors:
Arm7, Arm9, Arm11, Arm Cortex-a8
Avr, Pic, Psoc, Arduino, Freescale
Linux – Ubuntu
Linux – Android
Linux – Fedora
Linux – Wince
Qt – Creator
Beagle Bone Series
Raspberry Pi Series
Atmel, Atmega Series
3g Module, Wifi, Zigbee, Gprs
Ecg, Eeg, Spo2, Fprs, Usb Camera
Gsm, Rfid, Rf, Rf Pro
Wireless Sensor Networks
Dip Embedded Applications
Dsp Embedded Applications
Control Systems, Etc.
Our Training Features :
** 100% Outputs With Extension
** Paper Publishing In International Level
** Project Training Session Are Conducted By Real-time Instructor With Real-time Examples.
** Best Project Training Material .
** State-of-the-art Lab With Required Software For Practicing. fons
BeagleBone Black gains $50 4.3-inch cap touchscreen Cape
BeagleBone Black Wireless quickens development
On the subject of development boards, it’s not just about the Arduino or Raspberry Pi. The TI-friendly BeagleBone is there in the mix, too, fighting for your consideration
Which is a good reason to mention some developments around the BeagleBone Black single-board PC: there is the latest version and two new Capes from the BeagleBone team.
Apart from the BeagleBone Black Wireless (listed below), you will also discover two fresh ‘cape’ add-on boards for the existing BeagleBone Black.
BeagleBone Black Wireless
Foremost, the BeagleBone Black Wireless, which is basically a BeagleBone Black with in-built 802.11 b/g/n 2.4GHz Wi-Fi and also Bluetooth. It’s following in the route of the Raspberry Pi 3 by building in Wi-Fi support to de-stress wireless communications.
Its engine is the Texas Instruments Sitara AM3358 1GHz ARM Cortex-A8
“Just as the BeagleBone Black, the wireless preserves HDMI output, serial debug port, PC USB interface, USB 2.0 host, reset and power control keys, and offers two extra status LEDs for WiFi and Bluetooth,” writes BeagleBone.org.
“Likewise retained is the 4GB of built in eMMC memory with Debian Linux preinstalled, which allows the BeagleBone Wireless to boot in around Ten seconds and have you developing on your internet browser in less than Five minutes utilizing basically a single USB cable.”
You’ll discover the particulars of the board by expanding the photograph previously mentioned, and a data sheet is here for download.
Note that it marks the introduction of the Octavo OSD3358 SiP, including BeagleBone functionality into one BGA package.
Look at its functions and perks from this hyperlink http://www.mouser.com/new/octavo-systems/octavo-systems-osd335-sip/
Given that we’re talking about mastercard-dimensions peices of kit, space is required to be made for latest features. This means this particular BeagleBone has lost its 10/100 Ethernet port, making space for a TI WL1835 WiLink wi-fi interface.
The entire specs:
:: AM335x 1GHz ARM Cortex-A8
:: SGX530 graphics accelerator
:: NEON floating-point accelerator
:: 2x PRU 32bit 200Megahertz micro-controllers
:: WiLink 1835 802.11b/g/n 2.4GHz WiFi, Bluetooth, and Bluetooth Smart Module
:: USB client: power, debug and device
:: USB host
:: Micro High definition multimedia interface output
:: 2x 46 pin headers
:: 512MB DDR3 800MHZ RAM memory
:: 4GB Inlaid eMMC Flash with Debian Linux Distribution pre-installed
:: microSD Card Slot
:: Cloud9 IDE on Node.js w/ BoneScript library
Not forgetting the the 2 new capes…
Wireless Cape add-on
Be aware that the new Wireless Cape takes BeagleBone Black further than the abilities of BeagleBone Black Wireless, describes Steve Bush in his news piece on the release. It’s based on Texas Instruments WiLink 8 (WL1837) industrial dual-band (2.4GHz plus 5GHz), 2×2 MIMO Wi-Fi, Bluetooth and Bluetooth Smart (also called Bluetooth LE), which moreover includes Zigbee as well as NFC.
The cape is offered with Debian Linux Distribution pre-installed and 4GB of built in eMMC Flash memory. “Designers can be developing employing their internet browser in less than Five minutes by using one USB cable,” said Farnell.
Display cape add-on
Note there is an additional Display cape add-on conveniently obtainable. It carries connections for a 4.3in. color touch-screen an LED backlight and capacitive overlay “for a phone-like interface”.
The cape is targeted on interactive projects, embedded systems and stand-alone installments.
Cost is roughly ￡55 for the BeagleBone Black Wireless, ￡35 for the display cape add-on in addition ￡44 for the wireless cape add-on .
Purchase on Amazon . com site
BeagleBone Black Wireless Starter Kit- Includes : BeagleBone Black Wireless With WiFi and Bluetooth–Clear Case–Power Supply–Micro USB Cable