Sensor networks are the way to go if you have to monitor environmental data such as temperature in a wide area. Usually you need some infrastructure, including servers for communication, data storage, and the like and to manage the network and make the sensor data available. This session shows how you could build a sensor network, including the infrastructure, based on embedded devices only. It uses several embedded devices such as a Raspberry Pi, a BeagleBone Black, a Cubieboard2, and an i.MX6-based Cubox-i. The idea is to use cheap standard devices in combination with Java technology to realize a sensor network. In addition, it shows mobile clients, such as a smartwatch, for visualizing the sensor network data.

Gerrit Grunwald
Gerrit Grunwald is working as a software engineer at Canoo Engineering AG (Basel, Switzerland). He is responsible for visualizations of all kinds. His technical interests include Java desktop software development and specifically the subareasJavaFX, Java Swing and HTML5 controls.
He‘s a decent frequent blogger, founder and leader of the Java User Group in Münster (Germany), where he‘s also living.
He has been involved in the IT industry since 1996, when he started studying Applied Physics at the University of Applied Sciences Münster (Germany).
View more trainings by Gerrit Grunwald at

Find more related tutorials at kilde

BeagleBone Svart gevinster $50 4.3-tommers cap berøringsskjerm Cape

BeagleBone Svart gevinster $50 4.3-tommers cap berøringsskjerm Cape


BeagleBone Black Wireless hurries up development

When you’re thinking of development boards, Det handler ikke bare om Arduino og Raspberry Pi. TI-vennlig BeagleBone er det i miksen, også, struggling for your attention

Which is a justified reason to talk about some developments around the BeagleBone Black single-board computer: det er den nye versjonen og 2 nye Capes fra BeagleBone teamet.

Samt BeagleBone svart trådløs (listed below), du vil også finne 2 brand new ‘cape’ add-on boards for the existing BeagleBone Black.

BeagleBone svart trådløs

Foremost, the BeagleBone Black Wireless, which is for the most part a BeagleBone Black with on-board 802.11 b/g/n 2.4GHz Wi-Fi as well as Bluetooth. Det er følgende i ruten av Raspberry Pi 3 by building in Wi-Fi support to streamline wireless communications.

Its powerplant is the Texas Instruments Sitara AM3358 1GHz ARM Cortex-A8

“Ligner på BeagleBone Svart, den trådløse opprettholder HDMI, serie debug port, PC USB-grensesnitt, USB 2.0 vert, reset and power control buttons, og bringer 2 more status LEDs for WiFi and also Bluetooth,” states

“Also kept is the 4GB of on board eMMC memory with Debian Linux preinstalled, enabling the BeagleBone Wireless to boot in approximately Ten seconds and have you developing through the browser in fewer than Five min’s making use of simply a single USB cable.”

You can look at the specifics of the board by expanding the graphic above, og en dataarket er følgende for nedlasting.

Ta oppmerksom på at det markerer innføringen av Octavo OSD3358 SIP, integrere BeagleBone-funksjonalitet i en BGA-pakke.

Go and visit its features and benefits with this weblink

Considering that we’re speaking about plastic card-sizes peices of kit, space is required to be made for extra features. This in essence means this particular BeagleBone has displaced its 10/100 Ethernet-port, produserende plass for en TI WL1835 WiLink Wi-Fi-grensesnitt.

De fullstendige spesifikasjoner:

:: AM335x 1GHz ARM Cortex-A8
:: SGX530 grafikkakselerator
:: NEON flyttalls akselerator
:: 2x PRU 32bit 200MHz micro-controllers

:: WiLink 1835 802.11b / g / n 2,4 GHz WiFi, blåtann, pluss Bluetooth Smart-modul
:: USB-klient: makt, feilsøke og enhet
:: USB-vert
:: Micro HDMI-utgang
:: 2x 46 Stift-

:: 512Megabyte RAM DDR3 800Megahertz
:: 4GB Inserted eMMC Flash with Debian Distribution pre-installed
:: micro SD

Software Compatibility
:: Debian
:: Android
:: Ubuntu
:: Cloud9 IDE på node.js m / BoneScript bibliotek

Ikke glemme de to nye kapper ...

Wireless Cape addon

Notice that the new Wireless Cape takes BeagleBone Black above the abilities of BeagleBone Black Wireless, points out Steve Bush in his news piece on the release. It’s powered by Texas Instruments WiLink 8 (WL1837) industriell tobånds (2.4GHz & 5GHz), 2× 2 MIMO Wi-Fi, Bluetooth og Bluetooth Smart (otherwise known as Bluetooth LE), that also comes with Zigbee and NFC.

The cape unfolds with Debian Distribution pre-installed and 4GB of on board eMMC Flash memory. “Designers might be developing employing their browser in less than Five min’s by means of just one single USB cable,”Sa Farnell.

Visnings cape addon

Note there’s yet another Display cape addon sold. It provides connections for a 4.3in. color touch-screen an LED backlight and capacitive overlay “for a mobile-like interface”.

Klippen er rettet mot interaktive prosjekter, embedded systems and standalone set ups.


Pricing is approximately £55 for the BeagleBone Black Wireless, £ 35 for visning cape addon samt, £ 44 for den trådløse kappe addon .

Purchase on Amazon . com site

BeagleBone svart trådløs Starter Kit- inneholder : BeagleBone svart trådløs Med WiFi og Bluetooth–Clear case–Strømforsyning–Micro USB-kabel

Vi har tjent hundrevis av kunder globalt og din neste partner kan være oss. Vi er klar til å bringe virksomheten eller prosjekt til neste nivå!

Legg igjen et svar

e-postadressen din vil ikke offentliggjøres. Obligatoriske felt er merket *