I love the internet service Pandora Radio, so I decided to make a need little radio. Instructions on how to make your own (coming soon) at the links below. Inside is a Beagleboard running Ubuntu 12.4, using the CLI Pandora client Pianobar. A PIC24 microcontroller takes care of the buttons and LCD. It took about 8 months from conception to the completion of the project, but it was a ton of fun, and frustration, along the way. I was inspired by the Wifi Radio at MightyOhm to make something a bit more challenging. Enjoy.
Check out the links below.
http://www.engscope.com/pandorabar/ – project homepage and instructions
http://6xq.net/projects/pianobar/ – Pianobar homepage, a CLI Pandora client for linux
http://beagleboard.org/ – Beagleboard homepage
http://mightyohm.com/blog/2008/10/building-a-wifi-radio-part-1-introduction/ – Original Wifi Radio zdroj
BeagleBone Black zisky $50 4.3-palcový dotykový displej cap Cape
BeagleBone Black Wireless urýchľuje vývoj
With regards to development boards, že to nie je len o Arduino a Raspberry Pi. TI-friendly BeagleBone je tam v mixe, tiež, competing for your focus
Which is a valid reason to spotlight some developments around the BeagleBone Black single-board PC: je tu nová verzia a 2 Nové Capes z tímu BeagleBone.
Rovnako ako BeagleBone Black Wireless (dole), moreover, there are 2 fresh ‘cape’ add-on boards for the current BeagleBone Black.
BeagleBone Black Wireless
To begin with the BeagleBone Black Wireless, which is essentially a BeagleBone Black with in-built 802.11 b/g/n 2.4GHz Wi-Fi as well as Bluetooth. It’s going after in the route of the Raspberry Pi 3 by building in Wi-Fi support to shorten wireless communications.
Jeho motor je Texas Instruments Sitara AM3358 1GHz ARM Cortex-A8
"Podobne ako v prípade BeagleBone Black, bezdrôtový udržuje výstup HDMI, sériový port ladenia, Rozhranie USB PC, USB 2.0 hostiteľ, reset and power control keys, a prináša 2 more status Led lamps for WiFi and also Bluetooth,” explains BeagleBone.org.
“As well preserved is the 4GB of on board eMMC memory with Debian Linux preinstalled, enabling the BeagleBone Wireless to boot in approximately 10 seconds and have you developing on your internet browser in lower than Five min’s utilizing just a single USB cable.”
You will see the specifics of the board by expanding the photograph in this article, a list je nižšie k stiahnutiu.
Keep in mind that it marks the introduction of the Octavo OSD3358 SiP, vrátane funkcie BeagleBone do jedného balenia BGA.
Go look at its capabilities and benefits with this url http://www.mouser.com/new/octavo-systems/octavo-systems-osd335-sip/
Provided that we’re dealing with visa card-measurements peices of kit, space is to be made for additional features. It implies this particular BeagleBone has misplaced its 10/100 ethernetový port, generating space for a TI WL1835 WiLink wifi interface.
The whole specifications:
:: AM335x 1Gigahertz ARM Cortex-A8
:: SGX530 grafický akcelerátor
:: NEON s plávajúcou desatinnou čiarkou urýchľovač
:: 2x PRU 32bit 200MHz micro-controllers
:: WiLink 1835 802.11b / g / n 2,4 GHz WiFi, Bezdrôtová bluetooth, a tiež Bluetooth Inteligentné Module
:: klient USB: moc, ladenie a zariadení
:: USB host
:: výstup micro HDMI
:: 2X 46 kolíky
:: 512Megabyte DDR3 800Megahertz RAM
:: 4GB Included eMMC Flash with Debian Linux Distribution pre-installed
:: Karta Slot micro sd
Software Match ups
:: Cloud9 IDE na Node.js w / knižnica BoneScript
And lastly the the 2 Nové pláštenky ...
Wireless Cape doplnok
Be aware that the new Wireless Cape takes BeagleBone Black above the functionality of BeagleBone Black Wireless, explains Steve Bush in his news piece about the release. It is based on Texas Instruments WiLink 8 (WL1837) industrial dual-band (2.4GHz as well as 5Gigahertz), 2× 2 MIMO Wi-Fi, BT a Bluetooth Inteligentné (otherwise known as BT LE), which furthermore has Zigbee & NFC.
The cape occurs with Debian Linux Distribution pre-installed and 4GB of on-ship eMMC Flash memory. “Designers may be developing employing their internet browser in fewer than Five min’s utilizing a single USB cable,"Odpovedal Farnell.
Displej mys doplnok
Don’t forget there’s yet another Display cape add-on sold. It includes connections for a 4.3in. color touch screen an LED backlight and capacitive overlay “for a mobile-like interface”.
The cape concentrates on interactive projects, embedded systems and stand-alone installs.
Cost is approximately ￡55 for the BeagleBone Black Wireless, ￡35 for the display cape add-on in addition ￡44 for the wireless cape add-on .
Kúpiť na Amazonu . s
BeagleBone Black Wireless Starter Kit- obsahuje : BeagleBone Black Wireless S Wi-Fi a Bluetooth–clear Case–Zdroj–Micro USB kábel